Q40 MotorsportsEnter Garage

Find parts for your vehicle

Start with what you know.All parts
Saved vehicles
Vehicle details

No additional reviewed details

Ready to see available parts

No additional reviewed details are available for this selection. Add make, model or year to refine the results. Check each product’s application before ordering.

Choose make

Choices use the other selected filters. You can also enter a value directly.

Home / Drivetrain / Clutch Kits - Multi / Clutch Masters 00-06 Audi TT 1.8T MK1 6-Speed 725 Series Street Clutch w/Steel FW - 600ft/lbs Torque
Clutch Masters

Clutch Masters 00-06 Audi TT 1.8T MK1 6-Speed 725 Series Street Clutch w/Steel FW - 600ft/lbs Torque

PART 02017-TD7S-SHCATEGORY Clutch Kits - Multi
$1,753.13
MSRP $2,062.50You save $309.37
$1,753.13
1

Product information

Manufacturer information. Check the part number and installation requirements for your vehicle.

Supplier details checked 2026-09-23 · Test catalog

Some supplier details are unavailable for this product.

Product description

Conversion kit, will not work with OEM flywheel, built to work exclusively with Clutch Masters flywheel

FX725 Twin Disc Clutch Kit and Flywheel

Supplier category
Drivetrain
Supplier subcategory
Clutch Kits - Multi
UPC / barcode
02017-TD7S-SH
Units per product
1
Supplier Proposition 65 status
Unknown
Supplier EPA status
N/A
Air freight prohibited
No
Not CARB approved
No
CARB acknowledgement required
No
Freight delivery required
No
Powersports product
No
More manufacturer information

Other product descriptions

Clutch Masters 00-06 Audi TT 1.8T MK1 6-Speed 725 Series Street Clutch w/Steel FW - 600ft/lbs Torque

Clutch Masters Clutch and Flywheel Kit

Clutch/Flywheel Kit

About the manufacturer

What makes our FX725 and FX850 Multi-Disc Kits truly special, and a feature unique to Clutch Masters is our QR System, or Quick Release Pressure Plate. The QR System Incorporates three spring-loaded bolts allowing the pressure plate to engage and disengage evenly and smoothly while reducing internal clutch noise/chatter by up to 50%. The QR System was developed to provide quiet and smooth operation for the street user while delivering the performance a multi-disc race clutch needs. Flywheels are made for each specific application in either aluminum or steel. Our aluminum flywheels are machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Aluminum flywheels are Type 3 hard coat anodized to ensure their durability and performance lasts. Each aluminum flywheel includes a replaceable insert. Steel flywheels are machined from 1045 billet cores and are then black oxide treated for rust prevention.

Our billet covers see only .003" of flex where as a cast or stamped unit can see as much as .030" of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throwout bearing is used solely to engage and disengage the clutch and isn't wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.

“Street and Race” (TD7S)1 ceramic rigid disc, and 1 organic disc

Additional manufacturer information

Transmission Clutch and Flywheel Kit

Explore the 3D garage

Chevrolet Corvette C8 · Subaru WRX VA · Mazda Miata NA · Ford Mustang S197 · BMW 3 Series E46 · Honda S2000 AP1 · BMW M3 E30 · Honda Civic 11th generation · Audi S4 B5 · Ford Mustang S550 · BMW M3 E46 · Chevrolet Corvette C6 · Chevrolet Camaro 5th generation · BMW M3 E36 · Chevrolet Corvette C7 · Integra 3rd gen · Integra 2nd gen · Illustrative previews

Enter Garage