Q40 MotorsportsEnter Garage

Find parts for your vehicle

Start with what you know.All parts
Saved vehicles
Vehicle details

No additional reviewed details

Ready to see available parts

No additional reviewed details are available for this selection. Add make, model or year to refine the results. Check each product’s application before ordering.

Choose make

Choices use the other selected filters. You can also enter a value directly.

Home / Intake & Filtration / Cold Air Intakes / K&N 03 Hyundai Tiburon 2.7L-V6 Silver Typhoon Short Ram Intake
K&N Engineering

K&N 03 Hyundai Tiburon 2.7L-V6 Silver Typhoon Short Ram Intake

PART 69-5300TSCATEGORY Cold Air Intakes
$399.99
$399.99
1

Product information

Manufacturer information. Check the part number and installation requirements for your vehicle.

Supplier details checked 2026-09-23 · Test catalog

Some supplier details are unavailable for this product.

Product description

K&N's easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a silver powder coat finish.

TYPHOON; HYUNDAI TIBURON; 03; V6-2.7L (SILVER)

Performance Air Intake System

Features

K&N Million Mile Limited Warranty

Manufacturer notes

Associated products: RX-4730DK Air Filter Wrap, RU-4870 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

Supplier category
Air Intake Systems
Supplier subcategory
Cold Air Intakes
UPC / barcode
024844108760
Units per product
1
Supplier Proposition 65 status
Y
Supplier EPA status
Compliant
CARB executive order number
D-269-38
Air freight prohibited
No
Not CARB approved
No
CARB acknowledgement required
No
Freight delivery required
No
Powersports product
No

Manuals and documents

More manufacturer information

Other product descriptions

K&N 03 Hyundai Tiburon 2.7L-V6 Silver Typhoon Short Ram Intake

Performance Air Inta

Air Intake System

About the manufacturer

The K&N 69-5300TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Hyundai Tiberon GT and Coupe models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-5300TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.

The K&N 69-5300TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Hyundai Tiberon GT and Coupe models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-5300TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less.

Additional manufacturer information

Engine Cold Air Intake Performance Kit

Explore the 3D garage

Chevrolet Corvette C8 · Subaru WRX VA · Mazda Miata NA · Ford Mustang S197 · BMW 3 Series E46 · Honda S2000 AP1 · BMW M3 E30 · Honda Civic 11th generation · Audi S4 B5 · Ford Mustang S550 · BMW M3 E46 · Chevrolet Corvette C6 · Chevrolet Camaro 5th generation · BMW M3 E36 · Chevrolet Corvette C7 · Integra 3rd gen · Integra 2nd gen · Illustrative previews

Enter Garage