Manufacturer information. Check the part number and installation requirements for your vehicle.
Product description
aFe CONTROL Front and Rear Sway Bar Set Blue Toyota GR86/FR-S/BRZ 13-26 H4-2.0L/2.4L
aFe CONTROL Front and Rear Sway Bar Set Blue
Features
320 lbs/in (113% Stiffer than GR86)
405 lbs/in (170% Stiffer than GR86)
525 lbs/in (250% Stiffer than GR86)
467 lbs/in (211% Stiffer than GR86)
575 lbs/in (283% Stiffer than GR86)
Direct Fit Installation Requires No Modifications
Ø25.4mm (1”) Front Sway Bar, 2-Way Adjustment
Ø19mm (0.75”) Rear Sway Bar, 3-Way Adjustment
CNC Bent, Tubular & Solid Sway Bars
90A Durometer Polyurethane Bushings
High Articulating Rear End Links
Durable Blue Powder Coat
Proudly Made in the USA
- Supplier category
- Suspension
- Supplier subcategory
- Sway Bars
- UPC / barcode
- 802959007532
- Units per product
- 1
- Supplier Proposition 65 status
- Y
- Supplier EPA status
- N/A
- Air freight prohibited
- No
- Not CARB approved
- No
- CARB acknowledgement required
- No
- Freight delivery required
- No
- Powersports product
- No
More manufacturer information
Other product descriptions
aFe 13-23 Toyota GR86 H4-2.4/2.0L Control Front and Rear Sway Bar set
aFe CONTROL Sway Bar Set Blue
Sway Bar Set
About the manufacturer
Take your GR86/BRZ to the next level with aFe CONTROL’s sway bars. With our fully adjustable sway bars, you can easily dial in the handling balance and eliminate understeer. Body roll will be reduced, maximizing tire contact with the road. Shortened transition response will improve initial turn-in making the car more agile and feel lighter. Whether its stability on the track, more rotation on the autocross, or just adding confidence in the canyon, aFe CONTROL sway bars will deliver. Every aFe CONTROL sway bar is CAD designed and CNC bent to strict tolerances. This insures precise fit and perfect operation. Our front sway bar is 2-way adjustable and rear sway bar is 3-way. This allows the driver to dial in the front and rear roll resistance to achieve the desired handling bias. Front sway bars utilize laser cut end plates and the rear is equipped with laser cut arms. These are welded to the bar in a dedicated fixture to insure accurate hole positioning and consistent manufacturing. aFe CONTROL’s end links use PTFE lined Aurora rod ends with high articulating misalignment spacers. These are also length adjustable if you want to adjust out any static pre-load in the rear bar. aFe CONTROL includes low-deflection polyurethane bushings.
